NA6C Cam timing mod

DeeCee · Post by **DeeCee** » Sat May 26, 2012 7:23 pm

I am considering doing the cam timing mod to my NA6C but have not been able to find a link to any instructions about how to do this.

Can anyone help me ?

Thanks

sprsta · Post by **sprsta** » Sat May 26, 2012 7:58 pm

you need a timing light
go here and folow the instructions but set the timing to 14 degrees instead of 10

http://www.flyinmiata.com/techline/olde ... asp#TIMING TIPS FOR THE 1.6

DeeCee · Post by **DeeCee** » Sat May 26, 2012 8:18 pm

Thanks sprsta, I am onto that one.

The mod I am referring to changes the inlet and exhaust cam timing by swapping the timing gears (from memory)

SLYDIT · Post by **SLYDIT** » Sat May 26, 2012 9:43 pm

its called the "exhintake" mod or something similar.
i remember it was only for one engine type...can't remember if it was the 1600 or 1800

DeeCee · Post by **DeeCee** » Sat May 26, 2012 10:23 pm

Yes you are correct SLYDIT, I finally found some more info and seems it applies to the 1.8 engine, not the 1.6.

Angreal · Post by **Angreal** » Sun May 27, 2012 10:45 am

Speaking of exhintakes... Could anyone point me in the right direction for obtaining a reasonably priced exhaust camshaft?

REDBEN · Post by **REDBEN** » Sun Jun 03, 2012 1:14 pm

Angreal wrote:Speaking of exhintakes... Could anyone point me in the right direction for obtaining a reasonably priced exhaust camshaft?

Give Henry a call at Auckland Cams 0274860400, He's the lead Techie at ACL and will have a range of options available.

Angreal · Post by **Angreal** » Fri Jul 13, 2012 5:38 am

Can anyone also recommend a place to do the timing bump on my car?

sprsta · Post by **sprsta** » Fri Jul 13, 2012 8:03 am

ill do it if you like

Angreal · Post by **Angreal** » Fri Jul 13, 2012 8:50 am

sprsta wrote:ill do it if you like

Sweet. I'll pop by in a couple weeks dependant on whenever my container arrives with the bushings and exhaust

halberd · Post by **halberd** » Fri Jul 13, 2012 10:07 am

Angreal wrote:
sprsta wrote:ill do it if you like
Sweet. I'll pop by in a couple weeks dependant on whenever my container arrives with the bushings and exhaust

I'm also interested, if you are interested in doing it for me. How much would it cost?

NA6C Cam timing mod

NA6C Cam timing mod

Who is online