Just looked at the NZ Mazda website and it only lists a MkII
Turbo...? Anyone have any idea of price range of the MkIII? Any
idea of level of discount may be expected, if any? I'm in UK, so
it's not that convenient to phone a dealer!
--
Regards Terry
Foolproof operation: All parameters are hard coded.
--
MkIII on sale in NZ?
-
- Need, more, 5-ing, time....
- Posts: 100
- Joined: Fri May 19, 2006 5:55 am
- Location: UK
MkIII on sale in NZ?
Regards
-Terry
-Terry
-
- Need, more, 5-ing, time....
- Posts: 175
- Joined: Thu May 18, 2006 9:41 pm
- Location: Sunny Blenheim
MkIII on sale in NZ?
According to the listing in the December 2005 issue of NZ Autocar magazine,
the NC is $44,950.00 for the standard and $46,950.00 for the Ltd version.
Add $2000.00 for the auto option. The difference between the standard and
Ltd is (I think) that the Limited adds leather seats, cloth roof, and Bose
stereo system.
The New Zealand version does not have the traction control fitted to the UK
one. Don't know what other differences there are.
As for discount, I have no idea. I haven't been in the market for any new
vehicles since the late 1970's.
Grant.
the NC is $44,950.00 for the standard and $46,950.00 for the Ltd version.
Add $2000.00 for the auto option. The difference between the standard and
Ltd is (I think) that the Limited adds leather seats, cloth roof, and Bose
stereo system.
The New Zealand version does not have the traction control fitted to the UK
one. Don't know what other differences there are.
As for discount, I have no idea. I haven't been in the market for any new
vehicles since the late 1970's.
Grant.
Red 2006 NC Tiptronic
FIX A PC
FIX A PC
-
- Need, more, 5-ing, time....
- Posts: 175
- Joined: Thu May 18, 2006 9:41 pm
- Location: Sunny Blenheim
MkIII on sale in NZ?
According to the listing in the December 2005 issue of NZ Autocar magazine,
the NC is $44,950.00 for the standard and $46,950.00 for the Ltd version.
Add $2000.00 for the auto option. The difference between the standard and
Ltd is (I think) that the Limited adds leather seats, cloth roof, and Bose
stereo system.
The New Zealand version does not have the traction control fitted to the UK
one. Don't know what other differences there are.
As for discount, I have no idea. I haven't been in the market for any new
vehicles since the late 1970's.
Grant.
the NC is $44,950.00 for the standard and $46,950.00 for the Ltd version.
Add $2000.00 for the auto option. The difference between the standard and
Ltd is (I think) that the Limited adds leather seats, cloth roof, and Bose
stereo system.
The New Zealand version does not have the traction control fitted to the UK
one. Don't know what other differences there are.
As for discount, I have no idea. I haven't been in the market for any new
vehicles since the late 1970's.
Grant.
Red 2006 NC Tiptronic
FIX A PC
FIX A PC
MkIII on sale in NZ?
Hi Terry,
If you look at the For Sales on the club website, www.mx5club.co.nz one of
the dealers had some special pricing listed a week or so ago. Page 3 of the
list. Vince.
From supasparky@yahoo.co.uk Fri Apr 27 17:19:36 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk;
h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=kexTRjOTjeTkjiLWIU3XA8nArCNnPe2MfZikzcFboALwOgET9865jn6WYzHs38OZmcbYHb2/Y9eoEnuAxU+I898G1p3RRR3tm6HSGNhTGjjRxNWwmpEzRtLhHoifxCqSLsU3OcPmPXbcnYbcIbhhSZI/Em6WnxJxXeztVy+foaM=
;
Date: Mon, 5 Dec 2005 07:27:21 +0000 (GMT)
From: glenn roberts <supasparky@yahoo.co.uk>
Subject: $2,400 for a clutch job??? YOU MUST BE JOKING!!
To: MX5List <mx5list@mx5club.org.nz>
In-Reply-To: <000501c5f968$fa69f450$01cf60cb@CPQ17899145951>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <rgzv-C.A.IME.GxYMGB@L733>
Ok so our 2002 Ford Mondeo is showing early signs of
clutch slippage on hill starts. So i go to our local
dealer who tells me that a clutch kit is $580, plus
labour of $380, oh and i forgot...a new flywheel at
$1200 bucks,
they didnt mention the new realease arm which is
$250. so that comes to a grand total of...
$2410.00
WHAAAAAAAT? i only paid $10k for the car!!!
Ford service said they replace the flywheel regardless
of condition when doing clutch jobs...sounds dodgy to
me.
Can any one please tell me of a reputable clutch
specialist that would have knowledge of the ford
mondeo and its "dual mass" flywheel, so i can tell Mr
ford dealer to stick thier parts up thier
((*&&&&(*&*&(.
CHRISTMAS HAS BEEN CANCELLED DUE TO TECHNICAL
DIFFICULTIES.
Glenn "SLYDIT"
http://miata.cardomain.com/id/supasparky
Currently building a DIY Turbo..Subaru VF10 Turbo, Weld el manifold, 2.5"exhaust,subaru BOV, Isuzu intercooler, 330cc GTX injectors, dual feed fuel rail,RX7 air flow meter, Greddy Emanage piggy back computor.Custom full length cold air box...YEEEEEHHHAAA
Hopefully finished by summer:)
If you look at the For Sales on the club website, www.mx5club.co.nz one of
the dealers had some special pricing listed a week or so ago. Page 3 of the
list. Vince.
From supasparky@yahoo.co.uk Fri Apr 27 17:19:36 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk;
h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=kexTRjOTjeTkjiLWIU3XA8nArCNnPe2MfZikzcFboALwOgET9865jn6WYzHs38OZmcbYHb2/Y9eoEnuAxU+I898G1p3RRR3tm6HSGNhTGjjRxNWwmpEzRtLhHoifxCqSLsU3OcPmPXbcnYbcIbhhSZI/Em6WnxJxXeztVy+foaM=
;
Date: Mon, 5 Dec 2005 07:27:21 +0000 (GMT)
From: glenn roberts <supasparky@yahoo.co.uk>
Subject: $2,400 for a clutch job??? YOU MUST BE JOKING!!
To: MX5List <mx5list@mx5club.org.nz>
In-Reply-To: <000501c5f968$fa69f450$01cf60cb@CPQ17899145951>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <rgzv-C.A.IME.GxYMGB@L733>
Ok so our 2002 Ford Mondeo is showing early signs of
clutch slippage on hill starts. So i go to our local
dealer who tells me that a clutch kit is $580, plus
labour of $380, oh and i forgot...a new flywheel at
$1200 bucks,
they didnt mention the new realease arm which is
$250. so that comes to a grand total of...
$2410.00
WHAAAAAAAT? i only paid $10k for the car!!!
Ford service said they replace the flywheel regardless
of condition when doing clutch jobs...sounds dodgy to
me.
Can any one please tell me of a reputable clutch
specialist that would have knowledge of the ford
mondeo and its "dual mass" flywheel, so i can tell Mr
ford dealer to stick thier parts up thier
((*&&&&(*&*&(.
CHRISTMAS HAS BEEN CANCELLED DUE TO TECHNICAL
DIFFICULTIES.
Glenn "SLYDIT"
http://miata.cardomain.com/id/supasparky
Currently building a DIY Turbo..Subaru VF10 Turbo, Weld el manifold, 2.5"exhaust,subaru BOV, Isuzu intercooler, 330cc GTX injectors, dual feed fuel rail,RX7 air flow meter, Greddy Emanage piggy back computor.Custom full length cold air box...YEEEEEHHHAAA
Hopefully finished by summer:)
MkIII on sale in NZ?
Hi Terry,
If you look at the For Sales on the club website, www.mx5club.co.nz one of
the dealers had some special pricing listed a week or so ago. Page 3 of the
list. Vince.
From supasparky@yahoo.co.uk Fri Apr 27 17:19:36 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk;
h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=kexTRjOTjeTkjiLWIU3XA8nArCNnPe2MfZikzcFboALwOgET9865jn6WYzHs38OZmcbYHb2/Y9eoEnuAxU+I898G1p3RRR3tm6HSGNhTGjjRxNWwmpEzRtLhHoifxCqSLsU3OcPmPXbcnYbcIbhhSZI/Em6WnxJxXeztVy+foaM=
;
Date: Mon, 5 Dec 2005 07:27:21 +0000 (GMT)
From: glenn roberts <supasparky@yahoo.co.uk>
Subject: $2,400 for a clutch job??? YOU MUST BE JOKING!!
To: MX5List <mx5list@mx5club.org.nz>
In-Reply-To: <000501c5f968$fa69f450$01cf60cb@CPQ17899145951>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <rgzv-C.A.IME.GxYMGB@L733>
Ok so our 2002 Ford Mondeo is showing early signs of
clutch slippage on hill starts. So i go to our local
dealer who tells me that a clutch kit is $580, plus
labour of $380, oh and i forgot...a new flywheel at
$1200 bucks,
they didnt mention the new realease arm which is
$250. so that comes to a grand total of...
$2410.00
WHAAAAAAAT? i only paid $10k for the car!!!
Ford service said they replace the flywheel regardless
of condition when doing clutch jobs...sounds dodgy to
me.
Can any one please tell me of a reputable clutch
specialist that would have knowledge of the ford
mondeo and its "dual mass" flywheel, so i can tell Mr
ford dealer to stick thier parts up thier
((*&&&&(*&*&(.
CHRISTMAS HAS BEEN CANCELLED DUE TO TECHNICAL
DIFFICULTIES.
Glenn "SLYDIT"
http://miata.cardomain.com/id/supasparky
Currently building a DIY Turbo..Subaru VF10 Turbo, Weld el manifold, 2.5"exhaust,subaru BOV, Isuzu intercooler, 330cc GTX injectors, dual feed fuel rail,RX7 air flow meter, Greddy Emanage piggy back computor.Custom full length cold air box...YEEEEEHHHAAA
Hopefully finished by summer:)
If you look at the For Sales on the club website, www.mx5club.co.nz one of
the dealers had some special pricing listed a week or so ago. Page 3 of the
list. Vince.
From supasparky@yahoo.co.uk Fri Apr 27 17:19:36 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk;
h=Message-ID:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding;
b=kexTRjOTjeTkjiLWIU3XA8nArCNnPe2MfZikzcFboALwOgET9865jn6WYzHs38OZmcbYHb2/Y9eoEnuAxU+I898G1p3RRR3tm6HSGNhTGjjRxNWwmpEzRtLhHoifxCqSLsU3OcPmPXbcnYbcIbhhSZI/Em6WnxJxXeztVy+foaM=
;
Date: Mon, 5 Dec 2005 07:27:21 +0000 (GMT)
From: glenn roberts <supasparky@yahoo.co.uk>
Subject: $2,400 for a clutch job??? YOU MUST BE JOKING!!
To: MX5List <mx5list@mx5club.org.nz>
In-Reply-To: <000501c5f968$fa69f450$01cf60cb@CPQ17899145951>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <rgzv-C.A.IME.GxYMGB@L733>
Ok so our 2002 Ford Mondeo is showing early signs of
clutch slippage on hill starts. So i go to our local
dealer who tells me that a clutch kit is $580, plus
labour of $380, oh and i forgot...a new flywheel at
$1200 bucks,
they didnt mention the new realease arm which is
$250. so that comes to a grand total of...
$2410.00
WHAAAAAAAT? i only paid $10k for the car!!!
Ford service said they replace the flywheel regardless
of condition when doing clutch jobs...sounds dodgy to
me.
Can any one please tell me of a reputable clutch
specialist that would have knowledge of the ford
mondeo and its "dual mass" flywheel, so i can tell Mr
ford dealer to stick thier parts up thier
((*&&&&(*&*&(.
CHRISTMAS HAS BEEN CANCELLED DUE TO TECHNICAL
DIFFICULTIES.
Glenn "SLYDIT"
http://miata.cardomain.com/id/supasparky
Currently building a DIY Turbo..Subaru VF10 Turbo, Weld el manifold, 2.5"exhaust,subaru BOV, Isuzu intercooler, 330cc GTX injectors, dual feed fuel rail,RX7 air flow meter, Greddy Emanage piggy back computor.Custom full length cold air box...YEEEEEHHHAAA
Hopefully finished by summer:)
Who is online
Users browsing this forum: No registered users and 8 guests