actually it was the mag warehouse, on the ellerslie
panmure highway... they had Falken Azenis and Jamex
seats at decent prices too, if anyone's interested
I'm aiming to get my ride height about 1mm higher than
yours zorruno
--- zorruno <admin@mx5forum.co.nz> wrote:
[...]
lets go shopping... (was Re: autosalon)
lets go shopping... (was Re: autosalon)
I have posted on a few web sites in the last couple of days to see if anyone
is interested in a group buy on wheels and tyres, we are getting some 19"s
for our Cosmo and my brother 18"s for his RX-7, we are going to
MagWheelHouse on Friday to get us a good deal as one of their salesmen
suggested using buying two sets as a buying tool for a good deal with the
boss, and they have already given us a competitive quote. Anyone else
interested? I am sure that every other part that is bought at the same time
will help get a good deal.
E-mail me if interested.
bitchn.7@xtra.co.nz
is interested in a group buy on wheels and tyres, we are getting some 19"s
for our Cosmo and my brother 18"s for his RX-7, we are going to
MagWheelHouse on Friday to get us a good deal as one of their salesmen
suggested using buying two sets as a buying tool for a good deal with the
boss, and they have already given us a competitive quote. Anyone else
interested? I am sure that every other part that is bought at the same time
will help get a good deal.
E-mail me if interested.
bitchn.7@xtra.co.nz
-
- Black is the new black.
- Posts: 601
- Joined: Thu Apr 13, 2006 11:20 pm
- Location: An Eastern Beach
lets go shopping... (was Re: autosalon)
check stocks' price firstactually it was the mag warehouse,
Failed my last warrant on height, had to raise the front a few mm... that'sI'm aiming to get my ride height about 1mm higher than
yours zorruno
as high as I can raise my konis now. I'm thinking that an adjustable collar
such as ground control make may be a good solution
[...]
(z)
lets go shopping... (was Re: autosalon)
What's the ride height got to do with a pass / fail on a warrant?
I though the WOF was all about safety.
I though the WOF was all about safety.
-
- Black is the new black.
- Posts: 601
- Joined: Thu Apr 13, 2006 11:20 pm
- Location: An Eastern Beach
lets go shopping... (was Re: autosalon)
100mm to lowest part of car I believe (assuming you exclude wheels etc) -
exact wording unknown... Sam.. you out there - or anyone else know?
exact wording unknown... Sam.. you out there - or anyone else know?
(z)
lets go shopping... (was Re: autosalon)
Wording from LTSA Infosheet
The road clearance of the unloaded vehicle is not less than 100mm measured
at any
part of the vehicle other than the wheel rim, brake backing plate and the
outer knuckle
of the suspension joint. A lower road clearance is permitted if specified by
the vehicle
manufacturer. Body kits such as front spoiler and side skirts may be below
this level
provided they are of a lightweight construction.
Regards
Sam Parker
Adrenalin Publishing Ltd
PO Box 65 092 Mairangi Bay
Auckland
NEW ZEALAND
Ph 64 9 478 4771 fax 64 9 478 4779
The road clearance of the unloaded vehicle is not less than 100mm measured
at any
part of the vehicle other than the wheel rim, brake backing plate and the
outer knuckle
of the suspension joint. A lower road clearance is permitted if specified by
the vehicle
manufacturer. Body kits such as front spoiler and side skirts may be below
this level
provided they are of a lightweight construction.
Regards
Sam Parker
Adrenalin Publishing Ltd
PO Box 65 092 Mairangi Bay
Auckland
NEW ZEALAND
Ph 64 9 478 4771 fax 64 9 478 4779
Who is online
Users browsing this forum: No registered users and 7 guests