From the ashes... What did you do to your roadster today?

Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.

Moderators: LilRay.Sun, Furai, Growler, zorruno, jif

Post Reply
Timmo
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 393
Joined: Mon Sep 07, 2009 1:08 pm
Location: Takanini

From the ashes... What did you do to your roadster today?

Post by Timmo » Thu Apr 28, 2016 12:52 pm

Installed a roll bar, painted camcover/replaced gasket to stop oil weeping out

Image

Image
Ex: 1991 BRG NA6, 1998 White RS, 1997 Wine Merlot M Edition

AndyAli
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 3
Joined: Thu Aug 25, 2016 4:36 pm
Location: Rotorua

made NA headlights pop up

Post by AndyAli » Sat Aug 27, 2016 4:07 pm

made the headlights on our NA pop-up on the main beam flasher arm. so much easier than switching the head lights on and off when pass another MX lol
Just bought a 90 NA suspect I'll need advise lol

Papamoeziz
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 36
Joined: Tue Nov 10, 2015 1:20 pm
Location: Hamilton

Post by Papamoeziz » Tue Sep 20, 2016 9:40 pm

Replaced all my hoses with red, and binned a headlight!
May the bridges we burn light our way
'89 mx5
'89 mx5
'78 808
'77 Mazda 1200 ute
'89 Toyota corona

Timmo
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 393
Joined: Mon Sep 07, 2009 1:08 pm
Location: Takanini

Post by Timmo » Wed Sep 21, 2016 8:48 am

Replaced the strip LED's (one of which was falling off) with some LED driving lights....and also used a 1/4 tank to travel less than 100kms....Supercharger lyfe.
Ex: 1991 BRG NA6, 1998 White RS, 1997 Wine Merlot M Edition

AndyAli
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 3
Joined: Thu Aug 25, 2016 4:36 pm
Location: Rotorua

Post by AndyAli » Thu Sep 22, 2016 2:32 am

this weekend is a new rain gutter. got it from the USA seems to be better quality than the genuine part. will give feedback. also replacing all the bulbs with LED's and lastly mounting enamel union jacks on the wings
Just bought a 90 NA suspect I'll need advise lol

BRM
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 379
Joined: Thu Apr 25, 2013 9:01 pm
Location: North shore

Post by BRM » Sun Nov 06, 2016 6:54 pm

Image

Rev'd it.

jtsoldier
See my 5 and raise you.
See my 5 and raise you.
Posts: 76
Joined: Sat Oct 26, 2013 12:59 pm
Location: Christchurch

Post by jtsoldier » Sat Nov 12, 2016 9:50 pm

man ITBs make the engine bay look so much cleaner.

Fuck this turbo and its all its hoses and lines. :(

Keith Jones
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 329
Joined: Thu Jul 06, 2006 6:30 pm
Location: Waiuku

Post by Keith Jones » Mon Nov 14, 2016 11:57 am

+1
Attachments
DSCN1935.JPG

Mad Kiwi
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 372
Joined: Tue Oct 25, 2011 11:42 am
Location: Auckland

Post by Mad Kiwi » Mon Nov 14, 2016 11:13 pm

Lovely Keith, when do we see it again?

BRM
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 379
Joined: Thu Apr 25, 2013 9:01 pm
Location: North shore

Post by BRM » Tue Nov 15, 2016 5:46 pm

jtsoldier wrote:man ITBs make the engine bay look so much cleaner.

Fuck this turbo and its all its hoses and lines. :(
Webers.

Teamjelly
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 109
Joined: Wed Feb 27, 2013 11:54 pm
Location: McLaren Falls

Coil upgrade

Post by Teamjelly » Tue Nov 29, 2016 8:23 pm

Decided to give the old Girl a bit of a horsepower injection as she's been gathering dust in the corner of the workshop unloved for the past few months.
So installed a fully forged BP 1800 engine
Have upgraded the coils to a set of brand new LS-2 Coil per cylinder
Added an AEM Water Methanol Injection system - and upgraded the MEgasquirt MAP sensor to a 4 bar one in anticipation of 25psi.

Hoping for around 350-360hp at the wheels - which should be a bit of fun - and push the venerable 6 speed gearbox to the limits.

No worries though - as are doing an adaptor to fit the Rx7 Series 6-8 - 5 speed box to the MX5 housing - so that should be able to handle the power no problems.
Attachments
meth.jpg
meth
ls2 coils.jpg
coils
Sticking feathers up your butt does not make you a chicken

Post Reply

Return to “MX5 Discussion”

Who is online

Users browsing this forum: No registered users and 42 guests