Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
na6*dori
- Need, more, 5-ing, time....
- Posts: 115
- Joined: Wed Jul 25, 2012 8:01 pm
- Location: Nelson
Post
by na6*dori » Thu Oct 31, 2013 1:44 am
anyone know the factory measurements (ID) of the b6ze intake manifold? only need one of the four ports measured.... please?
In which i trust, a cable ties a must
-
Furai
- I have stars, you haven't. Deal with it
- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Thu Oct 31, 2013 7:45 am
What measurements do you need? I have one I can measure up
-
Snapfrozen
- I am quitting my job and going 5-ing
- Posts: 747
- Joined: Sun Jun 24, 2012 11:58 am
Post
by Snapfrozen » Thu Oct 31, 2013 9:29 am
42mm wide x 25mm high if you don't include the small circle part at the top of the port. Just measured on my spare 89 NA 1.6 IM. Only 0.xx mm difference between that and the head and I've cleaned the IM but not the head so imagine the measurements are correct still
-
na6*dori
- Need, more, 5-ing, time....
- Posts: 115
- Joined: Wed Jul 25, 2012 8:01 pm
- Location: Nelson
Post
by na6*dori » Thu Oct 31, 2013 12:41 pm
thankyou
In which i trust, a cable ties a must
-
na6*dori
- Need, more, 5-ing, time....
- Posts: 115
- Joined: Wed Jul 25, 2012 8:01 pm
- Location: Nelson
Post
by na6*dori » Thu Oct 31, 2013 12:45 pm
would i be right to say that converts to a 42mm diameter circle by using the circumference?
In which i trust, a cable ties a must
-
Snapfrozen
- I am quitting my job and going 5-ing
- Posts: 747
- Joined: Sun Jun 24, 2012 11:58 am
Post
by Snapfrozen » Fri Nov 01, 2013 1:20 pm
42mm wide, it's not round though..
-
na6*dori
- Need, more, 5-ing, time....
- Posts: 115
- Joined: Wed Jul 25, 2012 8:01 pm
- Location: Nelson
Post
by na6*dori » Mon Nov 04, 2013 11:59 pm
35mm i ment. as to work out how big i need to make my manifold to suit
In which i trust, a cable ties a must
Return to “MX5 Discussion”
Who is online
Users browsing this forum: No registered users and 103 guests