Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
warrior
- I only think 5.
- Posts: 989
- Joined: Wed Oct 06, 2010 7:11 pm
- Location: auckland
Post
by warrior » Tue Oct 15, 2013 3:07 pm
I have just bought a four point roll bar that I will be using for track days etc. I want to put a bit of padding on it do I don't take my head off if it hits it.
Ideas on what to use appox cost and the best place to get it please
warrior
-
MrGrey
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Tue Oct 15, 2013 3:44 pm
2 cheap options just off the top of my head are:
a) pool noodles
b) copper pipe lagging
both are available at your local hardware store
-
Keith Jones
- I count 5-s in my sleep
- Posts: 329
- Joined: Thu Jul 06, 2006 6:30 pm
- Location: Waiuku
Post
by Keith Jones » Tue Oct 15, 2013 3:53 pm
Para Rubber do a foam tube (bit like noodle material but black).
Comes with different ID hole - 20, 25, 32mm - but with same wall thickness 15mm.
The biggest one won't fit all the way round a roll bar tube, but is much less bulky than the proprietary roll bar padding and much cheaper.
-
Furai
- I have stars, you haven't. Deal with it
- Posts: 1394
- Joined: Tue Feb 14, 2012 5:57 pm
- Location: New Zealand
Post
by Furai » Tue Oct 15, 2013 4:15 pm
Cardwells, about $8 a length. Pool noodles wont pass a cert if you go for one.
-
STIG
- See my 5 and raise you.
- Posts: 78
- Joined: Tue Jun 11, 2013 4:36 pm
- Location: Auckland
Post
by STIG » Tue Oct 15, 2013 5:00 pm
Yeah, I've still got a shitload of that foam padding from Cardwells. It's quite thick stuff - I'd go with a flatter/more compact foam if possible.
R34 GT-R V-spec [STIG]
86' AE86 GT Apex
96' Red NA8C - M45 Supercharger
-
SLYDIT
- Keep calm, Forum Moderator here.
- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
Post
by SLYDIT » Tue Oct 15, 2013 5:10 pm
theres two thicknesses, one is FIA spec and much thicker, the other isnt as thick but will pass cert/msnz
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
Return to “MX5 Discussion”
Who is online
Users browsing this forum: No registered users and 112 guests