Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
-
GRUVBB
- I am quitting my job and going 5-ing
- Posts: 677
- Joined: Sat May 04, 2013 4:50 pm
- Location: Fastlane to Ak
Post
by GRUVBB » Sun Sep 15, 2013 3:19 pm
My car is a bit rough around the edges and if i extract the tek screwscthat currently hold plate on then will have to fill those holes....lol.... Will have a closer look when i fit hardtop this week and consider it.
Just provide me with a list of washers screw and locknuts etc and i will,sort put purchase initially. Not important which company he with but they do full range. Special deals better to have special discreetness..
-
MrGrey
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Sat Sep 28, 2013 1:10 am
just wondering if there was any update on this?
-
Snapfrozen
- I am quitting my job and going 5-ing
- Posts: 747
- Joined: Sun Jun 24, 2012 11:58 am
Post
by Snapfrozen » Sat Sep 28, 2013 8:29 am
Nothing back from him. Sorry about the delay guys. Will get in touch with a shop in Auckland this week. I think hes overseas
-
fooesboy
- Need, more, 5-ing, time....
- Posts: 117
- Joined: Wed Feb 20, 2013 11:44 am
- Location: Te Aroha, New Zealand
Post
by fooesboy » Tue Oct 15, 2013 7:38 pm
I had another wee chat with an office on the side of the road re my lack of front licence plate....
Any updates?
-
GRUVBB
- I am quitting my job and going 5-ing
- Posts: 677
- Joined: Sat May 04, 2013 4:50 pm
- Location: Fastlane to Ak
Post
by GRUVBB » Tue Oct 15, 2013 10:39 pm
I am visiting an engineer friend tomorrow night. I will ask if he is in a position to manufacture a quantity as per drawing.
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Tue Oct 15, 2013 11:00 pm
If you have a CAD Drawing in DXF I can get them laser cut out, as I have an account with North Shore Laser Cutting. Pm me for more details
1991 NA6 Mariner Blue with a twist of BP
-
Angreal
- I have stars, you haven't. Deal with it
- Posts: 1621
- Joined: Tue Feb 03, 2009 10:13 pm
- Location: At the pub
Post
by Angreal » Wed Oct 16, 2013 1:40 am
Dxf drawings eh? I can get you structural strength brackets
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Wed Oct 16, 2013 12:30 pm
Yeap if Snapfrozen can email me his drawing we can have them produce and out to you guys next friday....
1991 NA6 Mariner Blue with a twist of BP
-
brooke5
- Tentative sideways sliding....
- Posts: 23
- Joined: Tue Jul 10, 2012 9:45 pm
- Location: CHC
Post
by brooke5 » Wed Oct 16, 2013 12:42 pm
WOOOOOO
'89 JDM NA6 - Stock-ish for now
'96 Celica - Because DD
-
Skilfil
- I count 5-s in my sleep
- Posts: 481
- Joined: Mon Oct 31, 2011 12:59 pm
- Location: Auckland
Post
by Skilfil » Wed Oct 16, 2013 3:45 pm
Awesome, apart from the holes left in my bumper from the shit mount on it at the moment
-
MrGrey
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Wed Oct 16, 2013 5:41 pm
any idea what sort of ball park cost would be involved per unit?
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Thu Oct 17, 2013 7:29 am
Price will be depending on how many we get done at the time, eg. Multiples = cheaper, One off's = $$$
So I guess we start with a batch of 10 we can set the order around that number of people and I can get a price per item back to you guys.
Please indicate if you would like to be in the first batch,
1.Mr Grey
2.Brooke5
3.Skilfil
4.Cordedbowl
5.Fooesboy
6.Siren679
7.Simonmx5
8.BRM
9.Born_disturbed
10.Ch4ng
Last edited by
REDBEN on Mon Oct 21, 2013 12:23 pm, edited 10 times in total.
1991 NA6 Mariner Blue with a twist of BP
-
MrGrey
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Thu Oct 17, 2013 7:48 am
put me down for one please
-
brooke5
- Tentative sideways sliding....
- Posts: 23
- Joined: Tue Jul 10, 2012 9:45 pm
- Location: CHC
Post
by brooke5 » Thu Oct 17, 2013 8:45 am
Me please
'89 JDM NA6 - Stock-ish for now
'96 Celica - Because DD
-
Skilfil
- I count 5-s in my sleep
- Posts: 481
- Joined: Mon Oct 31, 2011 12:59 pm
- Location: Auckland
Post
by Skilfil » Thu Oct 17, 2013 2:10 pm
Definitely keen. Put me down please.
-
Simonmx5
- See my 5 and raise you.
- Posts: 96
- Joined: Thu Sep 19, 2013 9:18 pm
Post
by Simonmx5 » Thu Oct 17, 2013 3:33 pm
So how/where does this thing mount?
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Thu Oct 17, 2013 8:25 pm
Ok Team I have finished the final design, I will be emailing away tomorrow for a quote.
LH Mounting
RH Mounting
Question what material would you like it finished in?
- Brushed Aluminum or Stainless Steel?
Last edited by
REDBEN on Thu Oct 17, 2013 8:50 pm, edited 1 time in total.
1991 NA6 Mariner Blue with a twist of BP
-
REDBEN
- I count 5-s in my sleep
- Posts: 381
- Joined: Sat May 26, 2012 11:22 pm
- Location: West Harbour, Auckland
Post
by REDBEN » Thu Oct 17, 2013 8:27 pm
In Addition in the coming month's I will be designing and producing more and more parts. For example Hard top bolt on brackets for use with Roll bars and Roll-cages a like.
1991 NA6 Mariner Blue with a twist of BP
-
Skilfil
- I count 5-s in my sleep
- Posts: 481
- Joined: Mon Oct 31, 2011 12:59 pm
- Location: Auckland
Post
by Skilfil » Thu Oct 17, 2013 8:58 pm
Nice! +1 Karma for you for making parts for us.
Don't really have an input on the finish, either one looks fine to me.
-
fooesboy
- Need, more, 5-ing, time....
- Posts: 117
- Joined: Wed Feb 20, 2013 11:44 am
- Location: Te Aroha, New Zealand
Post
by fooesboy » Thu Oct 17, 2013 9:41 pm
Put me down for one
-
MrGrey
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
Post
by MrGrey » Thu Oct 17, 2013 10:55 pm
I am not fussed on the finish, I would personally lean towards which ever is cheapest because I am a tight ass
-
ch4ng
- See my 5 and raise you.
- Posts: 60
- Joined: Tue Apr 30, 2013 12:57 pm
- Location: Auckland
Post
by ch4ng » Thu Oct 17, 2013 11:08 pm
I'll definitely be interested in hard top brackets.
El Tigre NA6T
No Limits Onsite Paint Repairs
Cut & polishing, stone chips, scratch repairs 021-177-8539 Mention MX5Forum
-
siren676
- I have stars, you haven't. Deal with it
- Posts: 1115
- Joined: Fri Jun 08, 2012 12:21 am
- Location: Auckland
Post
by siren676 » Thu Oct 17, 2013 11:39 pm
Chock me up for a number plate mount
1990 NA6C MX5
-
SkilletKid
- I have stars and not afraid to use them
- Posts: 288
- Joined: Mon Jan 21, 2013 8:26 pm
- Location: North Shore, Auckland
Post
by SkilletKid » Fri Oct 18, 2013 12:24 am
Did somebody say hardtop brackets?
'cause I'm keen.
"Yes, you got that, 16 years of [MX5] ownership and you too can become the Obi-wan Kenobi of not giving a s**t." - Moti
Return to “MX5 Discussion”
Who is online
Users browsing this forum: No registered users and 77 guests