Caliper bolts needed

Euen · Post by **Euen** » Tue Sep 04, 2012 10:12 pm

Am in the process of rebuilding a rear subframe and have just discovered I don't have the bolts that hold the rear calipers to the uprights.

Before I go chasing off to Ross or Brownie, would anyone in the Auckland area have a set they don't need anymore.

WideOpenThrottle · Post by **WideOpenThrottle** » Wed Sep 05, 2012 7:39 am

Hi Euen

I may have some..would they be 14 or 17 mm socket head & how long a bolt?

Will search tonight after work

Euen · Post by **Euen** » Wed Sep 05, 2012 9:14 am

Full spec is M10 x 30 x 1.25 with a 14mm head. They are grade 10 bolts.

Thanks, appreciate your help.
E

Donovan · Post by **Donovan** » Wed Sep 05, 2012 9:33 am

I most likely have them lying around, that I would have pulled off the NB, the trick is trying to find them. Did you want to pop around this weekend?

Euen · Post by **Euen** » Wed Sep 05, 2012 11:02 am

Can do. Will text you to sort out a time. Will be a good excuse to get the TG out again.

2low2c · Post by **2low2c** » Wed Sep 05, 2012 11:18 am

i have a set here i am here till 7.00 pm every night if you want to stop by and pick them up.

Euen · Post by **Euen** » Wed Sep 05, 2012 12:11 pm

Thanks Paul. Will pop by this afternoon.

Euen · Post by **Euen** » Wed Sep 05, 2012 4:21 pm

Thanks Paul. Very helpful as always.

Thanks Wide Open Throttle and Donovan, I have a set now.

Caliper bolts needed

Caliper bolts needed

Who is online