Discussions relating to MX5 Tyre choice, Wheels, Brakes Suspension components and other items to keep you going around corners, stuck to the ground or stopping on a dime.
Moderators: Growler, jif, Born_disturbed, punkoutnz
-
Chris C
- Hey. They are NOT Training wheels.

- Posts: 2
- Joined: Sun Oct 07, 2007 4:06 pm
Post
by Chris C » Sun Oct 07, 2007 4:12 pm
Hi Guys im actually an e30 bmw owner, i do like mx5s though!
But i have noticed a lot of mx5s with BBS RS 15" wheels, and im after one outer dish for a 7.5 inch wide one, with a 1.5 inch wide dish.
Can ANYONE help with this or know who has parts in NZ???
Im having to resort to spending huge cash otherwise from london for the bits!
Cheers

-
Attachments
-

-
Growler
- Yes. I might just know (Trusted Advisor)

- Posts: 433
- Joined: Sat May 06, 2006 8:25 pm
- Location: Auckland
Post
by Growler » Mon Oct 08, 2007 9:59 am
What you have posted looks like a two/three piece wheel.
The factory BBS wheel is one single casting so you can't change the offset etc by mixing and matching inners and outers.
Growler.
-
Chris C
- Hey. They are NOT Training wheels.

- Posts: 2
- Joined: Sun Oct 07, 2007 4:06 pm
Post
by Chris C » Mon Oct 08, 2007 1:20 pm
yes thats right the RS is a two piece wheel. Im sure ive seen the same on more than a few mx5's just not in re-furbushed condition like that one.
-
Growler
- Yes. I might just know (Trusted Advisor)

- Posts: 433
- Joined: Sat May 06, 2006 8:25 pm
- Location: Auckland
Post
by Growler » Mon Oct 08, 2007 1:57 pm
If you are just after the outer you could speak to someone like Arrow wheels who manufacture 2/3 piece wheels.
Growler.
-
Ian
- I count 5-s in my sleep

- Posts: 439
- Joined: Fri May 19, 2006 3:39 pm
- Location: Arrowtown
Post
by Ian » Mon Oct 08, 2007 6:31 pm
The factory BBS MX5 rims were one piece, as Growler said, and the 15s were 6" wide. (tho aftermarket may well be almost any size)
When I had an E30, I fitted some BBS factory rims,also 1 piece....they were 15 x 7.
93 1.8,intake/ex mods,Megasqirt PNP,torsen ,konis,GC coilovers,Nitto-01,cage,sparco seat,Schroth harness.
-
SLYDIT
- Keep calm, Forum Moderator here.

- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
Post
by SLYDIT » Sun Oct 14, 2007 12:22 pm
there are TWO specialist mag wheel repairers in Tauranga that do excellent work on bent wheels..i had two steel wheels repaired as they had major pothole damage and now theyre perfect. When i took them in to get fixed he was working on an absolutly shagged RX7 mag that i would have thrown out, but it was fixed like new...give them a call...
they are ..ROAD WHEELS NEW ZEALAND, 15TH AVE TAURANGA, PH 07 5785296
theres also another in Burrows st Tauranga..Ph 075713115
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
Return to “MX5 Suspension, Wheels, Tyres & Brakes etc”
Who is online
Users browsing this forum: No registered users and 5 guests