What do I use?

warrior · Post by **warrior** » Wed Sep 03, 2014 6:01 pm

I am trying to stick my mazda emblem back onto my nose cone, I have tried normal double sided tape but it is just not good enough.

When I got the emblem it had a grey rubbery substance to stick it on with and that worked great....any ideas what I can use and where I can get it from?

siren676 · Post by **siren676** » Wed Sep 03, 2014 6:06 pm

3M double sided trim tape, it'll never come off again though

warrior · Post by **warrior** » Wed Sep 03, 2014 6:07 pm

Where can I get it?

siren676 · Post by **siren676** » Wed Sep 03, 2014 7:43 pm

Usual auto stores should stock it

SkilletKid · Post by **SkilletKid** » Thu Sep 04, 2014 1:23 am

If you want it to come off, 3M's clear mounting tape is pretty strong too. (quite thick with red backing paper)

Stevo · Post by **Stevo** » Thu Sep 04, 2014 6:13 am

That 3M tape is the stuff to use but its expesive as you have to buy a roll.
Just rock up to your local panelbeater and ask for 100mm of it or whatever you need.
Probably charge you $1 if anything at all.

WideOpenThrottle · Post by **WideOpenThrottle** » Thu Sep 04, 2014 4:02 pm

Silicone adhesive from building supplies or silicone gasket maker from auto parts is what I commonly use for jobs like this..[mainly cos I always have them lying around]!

McNuggetBandit · Post by **McNuggetBandit** » Fri Sep 05, 2014 12:12 am

3 things that fix every car problem,

Cable Ties
Duct Tape
Gasket Goo

In this case gasket goo would work

sprsta · Post by **sprsta** » Fri Sep 05, 2014 7:34 pm

Come see me I'll reback it for you.

0211220097

it wont come off

warrior · Post by **warrior** » Sat Sep 06, 2014 2:14 pm

Thanks for the offer but I got it sorted.

What do I use?

What do I use?

Who is online