Suspension bushes

Archives of Posts to the NZ MX5 List back in 2002
Locked
Mathew

Suspension bushes

Post by Mathew » Fri Nov 15, 2002 10:18 am

Hi Gary.Did you just replace them with factory bushes, or did you source aftermarket ones.

M@

Gary Morrison
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 100
Joined: Sun Jun 04, 2006 3:24 pm
Location: Wellington

Suspension bushes

Post by Gary Morrison » Fri Nov 15, 2002 5:41 pm

Hi Matthew,

I used the factory ones. Cost for the rear set was about $450. As the suspension was in bits it wasn't too much of a job, except that I had the old bushes pressed out, the suspension parts stripped and powder coated, and then the new bushes pressed in. That all cost about $100. There is a set from Flyin Miata in the USA, Powerflex I think, and they seem to work out about the same or slightly less. They are a urethane set I think, and supposedly should last forever.

Gary


On Fri, 15 Nov 2002 10:18:25 +1300, Mathew wrote:

Hi Gary.Did you just replace them with factory bushes, or did you source aftermarket ones.

M@

Locked

Return to “2002”

Who is online

Users browsing this forum: No registered users and 15 guests