Ebay, Trademe, Yahoo Auction Finds
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
Going to attempt to re-black my front lip at some stage, as well as various other small things that're bugging me.
The wheels also need a tidy up, but it's probably easier (read: more economical) to buy nicer wheels in good nick than it is to clean up the old ones... Unless there's a solution you lot are hiding from me.
Welp, onto the wishlist it goes.
The wheels also need a tidy up, but it's probably easier (read: more economical) to buy nicer wheels in good nick than it is to clean up the old ones... Unless there's a solution you lot are hiding from me.
Welp, onto the wishlist it goes.
-
- I have stars, you haven't. Deal with it
- Posts: 1172
- Joined: Mon Jan 21, 2013 3:52 am
- Location: Northland
have a nosey at this thread as repainting rims is pretty easy...
viewtopic.php?t=10666
I spent this afternoon mucking around with some aluminum trying to make one of those wind deflector thingy's the screw onto the drivers side window wiper.
viewtopic.php?t=10666
I spent this afternoon mucking around with some aluminum trying to make one of those wind deflector thingy's the screw onto the drivers side window wiper.
-
- I have stars and not afraid to use them
- Posts: 206
- Joined: Fri Jun 27, 2008 8:10 pm
- Location: auckland
Yup, i have 1 set left in stockMrGrey wrote:do you have the smoked lenses broomfish?
http://www.broomfish.co.nz/product_info ... ts_id=1657
-
- I have stars and not afraid to use them
- Posts: 242
- Joined: Mon Dec 16, 2013 2:19 pm
- Location: Wellington/Christchurch
Wish they made these badboys in a 16" diameter:
http://www.good-win-racing.com/Mazda-Pe ... -1388.html
Am very tempted to get a set anyway. Flow formed at 12.2lbs / 5.5kg for 15x9 +35. $159 usd each.
Will 15 look too small on an NB?
http://www.good-win-racing.com/Mazda-Pe ... -1388.html
Am very tempted to get a set anyway. Flow formed at 12.2lbs / 5.5kg for 15x9 +35. $159 usd each.
Will 15 look too small on an NB?
-
- I count 5-s in my sleep
- Posts: 367
- Joined: Thu Apr 18, 2013 12:52 pm
- Location: Hamiltron
-
- I have stars and not afraid to use them
- Posts: 288
- Joined: Mon Jan 21, 2013 8:26 pm
- Location: North Shore, Auckland
(from my reading) I thought 9" was a much faster set up than the same tyres on a 7" or 8"? 225/45/15s seem to be the fave tyre combo along with 15x9s in the States since it puts the sidewall of the tyre closer to perpendicular with the wheel.marcellarius wrote:15" is the right size IMO 9" is too wide. Unless you're going for a particular aesthetic appearance then closer to 7" will cause less issues with clearance, you'll have a better selection of tyres and the handling will probably be better.
Does need a fender roll though.
edit: these are from guys who seem to only use their cars for the track though.
"Yes, you got that, 16 years of [MX5] ownership and you too can become the Obi-wan Kenobi of not giving a s**t." - Moti
-
- I am quitting my job and going 5-ing
- Posts: 747
- Joined: Sun Jun 24, 2012 11:58 am
-
- I count 5-s in my sleep
- Posts: 367
- Joined: Thu Apr 18, 2013 12:52 pm
- Location: Hamiltron
-
- I count 5-s in my sleep
- Posts: 334
- Joined: Fri Jul 13, 2012 5:12 pm
9" is silly for a DD.
Those are a very similar style to XXR 527's which can be had in 15x8.25 (derp .25" sizes) and a 16x8.25".
Pretty cheap wheels, $115 USD: http://www.nlmotoring.com/XXR-527-Wheel ... 68082n.htm
But they are 0 offset (ugh) and likely to be pretty heavy as they're another knockoff company.
Those are a very similar style to XXR 527's which can be had in 15x8.25 (derp .25" sizes) and a 16x8.25".
Pretty cheap wheels, $115 USD: http://www.nlmotoring.com/XXR-527-Wheel ... 68082n.htm
But they are 0 offset (ugh) and likely to be pretty heavy as they're another knockoff company.
-
- I have stars and not afraid to use them
- Posts: 242
- Joined: Mon Dec 16, 2013 2:19 pm
- Location: Wellington/Christchurch
Ridiculous, and wouldn't pay even half as much as they're asking: http://www.trademe.co.nz/a.aspx?id=707449188
...yet for some reason i want one.
...yet for some reason i want one.
-
- Tentative sideways sliding....
- Posts: 43
- Joined: Fri Mar 15, 2013 1:38 pm
http://www.trademe.co.nz/motors/car-par ... 628135.htm
For anyone interested in these I just wanted to give a heads up that Wade(The guy selling them) is not the most trusthworthy character..
I spoke in great detail about the car I bought off him (he insisted no problems) and after already owning a MX5 I knew what questions to ask and it turned out after I booked flights and flew up to Auckland the car had quite a few big problems, gbox, diff, engine mounts, all engine seals, waterpump.... You get the jist many problems which I know I should have just walked away (Got some $$ off) but things became far more apparent halfway down the North Island when I was stranded with an alternator that had just about fallen off the car and then he said when he finds the injectors(that came with the car!) he would post to me FOC at my expense as he believes in karma blah blah blah.
Just wanted to give a heads up if anyone was looking at these as I am sure used injectors can be sourced cheaper and from reputable sources. or even better get some IDs
Cheers
Liam
For anyone interested in these I just wanted to give a heads up that Wade(The guy selling them) is not the most trusthworthy character..
I spoke in great detail about the car I bought off him (he insisted no problems) and after already owning a MX5 I knew what questions to ask and it turned out after I booked flights and flew up to Auckland the car had quite a few big problems, gbox, diff, engine mounts, all engine seals, waterpump.... You get the jist many problems which I know I should have just walked away (Got some $$ off) but things became far more apparent halfway down the North Island when I was stranded with an alternator that had just about fallen off the car and then he said when he finds the injectors(that came with the car!) he would post to me FOC at my expense as he believes in karma blah blah blah.
Just wanted to give a heads up if anyone was looking at these as I am sure used injectors can be sourced cheaper and from reputable sources. or even better get some IDs
Cheers
Liam
-
- I have stars, you haven't. Deal with it
- Posts: 1397
- Joined: Mon Mar 26, 2012 8:59 am
- Location: Auckland
Are you local to Auckland?Junkwhale wrote:Ridiculous, and wouldn't pay even half as much as they're asking: http://www.trademe.co.nz/a.aspx?id=707449188
...yet for some reason i want one.
1 X Primera
2 X Silvia
1 X BMW E30
1 X Audi A6
3 X Mazda MX5 (1989, 1990, 1991)
2 X Silvia
1 X BMW E30
1 X Audi A6
3 X Mazda MX5 (1989, 1990, 1991)
-
- Why yes, actually I do run this site.
- Posts: 470
- Joined: Wed May 24, 2006 10:03 pm
- Location: I'm a JAFA and I'm OK
Ebay, Trademe, Yahoo Auction Finds
youtube find !
http://www.youtube.com/watch?v=Ip_iK4mfSF4
there's a rare M2 1028 at about 1:15 :)
[Posted via external email]
http://www.youtube.com/watch?v=Ip_iK4mfSF4
there's a rare M2 1028 at about 1:15 :)
[Posted via external email]
Who is online
Users browsing this forum: No registered users and 38 guests