REAR CAMBER ARMS NA/NB

Discussion about MX5s, Roadsters & Miatas, not directly fitting into one of the categories below. Please keep it on topic.

Moderators: LilRay.Sun, Furai, Growler, zorruno, jif

Post Reply
Jesse Pinkman
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 49
Joined: Wed May 14, 2014 2:54 pm
Location: Auckland

REAR CAMBER ARMS NA/NB

Post by Jesse Pinkman » Fri Aug 12, 2016 10:38 am

Does anyone on here have certifiable rear camber arms on their car? Would really like to borrow them for a couple weeks please!!!

Please help a fellow mx5er out here I've had enough of these bloody certifiers messing me around. Initial cert cost - 750, recheck failed on truhart camber arms due to dodgy welds another 180, get told paco motorsport arms will be ok - turns out they're not okay and he suddenly has a bunch of issues I need to sort out with them another 180.. Now I gotta get them all tig welded up again and sent off to TAC for an extra 100 (and even after all this they MAY still fail them) and then I can get another recheck done for the cert. Had enough. Send help

So please!! If anyone has some camber arms that are certable just so I can get the little tag on my plate that says adjustable rear camber arms that would be greatly, immensely appreciated!! I'll buy you a box or give you a haircut or some shit or let you drive my 270hp mx5 when its done if that tickles your fancy ;)
THANK YOU!!

ps: im in auckland so closeish by would be preferable although I can and will travel and I'll do all the work taking the arms out and putting them back in etc..
Don’t confuse fame with success. Madonna is one; Helen Keller is the other.

biff
I have stars and not afraid to use them
I have stars and not afraid to use them
Posts: 248
Joined: Tue May 23, 2006 3:17 pm
Location: Christchurch

REAR CAMBER ARMS NA/NB

Post by biff » Fri Aug 12, 2016 1:20 pm

Hi Jesse, sorry cant help, but name and shame this jerk, we don't want
anyone else being milked by this jerk.


-----Original Message-----
From: Jesse Pinkman
Sent: Friday, August 12, 2016 10:38 AM
To: mx5talk@mx5forum.co.nz
Subject: [MX5] REAR CAMBER ARMS NA/NB

Does anyone on here have certifiable rear camber arms on their car? Would
really like to borrow them for a couple weeks please!!!

Please help a fellow mx5er out here I've had enough of these bloody
certifiers messing me around. Initial cert cost - 750, recheck failed on
truhart camber arms due to dodgy welds another 180, get told paco motorsport
arms will be ok - turns out they're not okay and he suddenly has a bunch of
issues I need to sort out with them another 180.. Now I gotta get them all
tig welded up again and sent off to TAC for an extra 100 (and even after all
this they MAY still fail them) and then I can get another recheck done for
the cert. Had enough. Send help

So please!! If anyone has some camber arms that are certable just so I can
get the little tag on my plate that says adjustable rear camber arms that
would be greatly, immensely appreciated!! I'll buy you a box or give you a
haircut or some shit or let you drive my 270hp mx5 when its done if that
tickles your fancy ;)
THANK YOU!!

ps: im in auckland so closeish by would be preferable although I can and
will travel and I'll do all the work taking the arms out and putting them
back in etc..

------------------------
Don’t confuse fame with success. Madonna is one; Helen Keller is the other.






---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

[Posted via external email]
Red MX NA
ZOOM1N

Post Reply

Return to “MX5 Discussion”

Who is online

Users browsing this forum: No registered users and 26 guests