I am doing all the bushes in my car and what to replace the tie rod ends and the lower and upper ball joints......where is the best place to get these?
Ross has them for about $55.00ea
Parts needed
Moderators: LilRay.Sun, Furai, Growler, zorruno, jif
Parts needed
warrior
-
- Keep calm, Forum Moderator here.
- Posts: 1610
- Joined: Sun May 21, 2006 6:18 pm
- Location: In the Garage.
are the ball joints stuffed? or just the rubbers? you can buy the rubbers seperatly. you can get the ones for the suspension ball joints and the steering tie rods
http://www.miataroadster.com/energy_sus ... 65990.aspx
imsure the local suspension place would have generic ones.
The 12mm x 30.5mm size fits NA/NB Miata upper ball joints and steering rack outer tie rod end ball joints.
The 14mm x 36.5mm size fits NA/NB Miata lower ball joints.
http://www.miataroadster.com/energy_sus ... 65990.aspx
imsure the local suspension place would have generic ones.
The 12mm x 30.5mm size fits NA/NB Miata upper ball joints and steering rack outer tie rod end ball joints.
The 14mm x 36.5mm size fits NA/NB Miata lower ball joints.
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002
SCARING PRIUS DRIVERS SINCE 2002
Who is online
Users browsing this forum: No registered users and 104 guests