Group buy for Garage Star licence plate bracket?

Simonmx5 · Post by **Simonmx5** » Fri Oct 18, 2013 10:58 am

Put me down for one please, as long as they aren't mega expensive!

REDBEN · Post by **REDBEN** » Fri Oct 18, 2013 5:29 pm

Afternoon team,

I have recieved a price for the laser cutting, I made the decision to go with Stainless Steel as its more corrosion resistant and easier to bend as aluminium can crack.

The price for each Bracket will be $37 incl gst. (This is a set price for this group buy)

Included in the price is a full stainless steel tamper proof fitting kit.

Compared to other brackets from the states priced around $80 NZD Landed this is by far a cheaper option.

If you need the item shipped please let me know, there are still 3 spaces open for this group buy, if you would like to get in on this please PM me or just post on this thread.

REDBEN

CordedBowl · Post by **CordedBowl** » Sat Oct 19, 2013 12:06 am

Fantastic, REDBEN industries is off to a great start.

MrGrey · Post by **MrGrey** » Sat Oct 19, 2013 12:16 am

would it be possible to have the PRD logo changed to RBE or RBI?
(RedBen Enterprises/Industries) ..... I know its a a silly cosmetic change but it would be cool in my opinion

BRM · Post by **BRM** » Sat Oct 19, 2013 12:30 am

yup
I'm in.

REDBEN · Post by **REDBEN** » Sat Oct 19, 2013 7:40 am

MrGrey wrote:would it be possible to have the PRD logo changed to RBE or RBI?
(RedBen Enterprises/Industries) ..... I know its a a silly cosmetic change but it would be cool in my opinion

There is a bigger plan Mr Grey

more to come in the next couple of weeks

Angreal · Post by **Angreal** » Sat Oct 19, 2013 2:21 pm

REDBEN wrote:
MrGrey wrote:would it be possible to have the PRD logo changed to RBE or RBI?
(RedBen Enterprises/Industries) ..... I know its a a silly cosmetic change but it would be cool in my opinion
There is a bigger plan Mr Grey more to come in the next couple of weeks

Hmmm RBE 45psi + nos bolt on kits?

MrGrey · Post by **MrGrey** » Sat Oct 19, 2013 3:17 pm

I hacked Ben's email account (hotsexyman69@hotmail.com)
and found his business plan... basically it involves extracting 'plasmids' from a rare seaslug that when added to a cars fuel system will give a car super powers.

There were also some company logos that are totally legit and not photoshopped at all.

Looks legit to me and as its on the internet, it must be true.

REDBEN · Post by **REDBEN** » Sat Oct 19, 2013 5:28 pm

MrGrey · Post by **MrGrey** » Sat Oct 19, 2013 5:48 pm

REDBEN wrote:Would you kindly get the word out there!

fixed that for you

-=edit=- bearing in mind that some of you may have no idea wtf I am on about, you can either just assume I am smoking more crack than usual or read info here:
http://bioshock.wikia.com/wiki/Ryan_Industries
http://bioshock.wikia.com/wiki/Would_You_Kindly

I hope Redben isn't like Andrew Ryan to be honest, things didn't go so well for him, but in his defense, he was good at teaching you how to play golf.

REDBEN · Post by **REDBEN** » Sat Oct 19, 2013 7:08 pm

Hey Team,

Two spots left on this group buy, get in quick.

I will PM those people who have already shown interest with more details shortly.

REDBEN

Born_disturbed · Post by **Born_disturbed** » Mon Oct 21, 2013 10:24 am

Im in

ch4ng · Post by **ch4ng** » Mon Oct 21, 2013 12:24 pm

in with a creepy grin

Born_disturbed · Post by **Born_disturbed** » Mon Oct 21, 2013 12:27 pm

Thats your 2 spots filled Ben

REDBEN · Post by **REDBEN** » Mon Oct 21, 2013 1:29 pm

Thank you Gentlemen, PMs to follow tonight.

REDBEN · Post by **REDBEN** » Mon Oct 21, 2013 8:49 pm

I have just sent out the PM's with further info.

For all those people who would like to pick there's up please let me know in a PM and I can send the address.

REDBEN · Post by **REDBEN** » Wed Oct 23, 2013 11:35 pm

Evening Team,

I am only waiting on a test template to turn up should have it tomorrow, will final check it, then place the order for 10 on Monday. Cut off date to add to the order will be 5 pm Friday 25 October.

REDBEN

REDBEN · Post by **REDBEN** » Thu Oct 24, 2013 9:56 pm

Template recieved this morning, managed to conned one of the locals into letting me test fit the bracket onto His MX5. Looks pretty awesome and easy enough to bend into shape to suit how you would like it. Full steam a head with the group order should have them early next week Sometime.

REDBEN

CordedBowl · Post by **CordedBowl** » Thu Oct 24, 2013 10:01 pm

Swishhh~!

Simonmx5 · Post by **Simonmx5** » Fri Oct 25, 2013 3:28 pm

Looks good!

REDBEN · Post by **REDBEN** » Thu Oct 31, 2013 12:53 pm

Those people waiting on licence plate bracket, I should have them early monday, I rang the laser cutters to check out where there at. The cutting is planned for tomorrow but there flat-out and the laser cutter is down for servicing on friday.

Sorry for any inconvenience, I will have them out to you guys really soon!

CordedBowl · Post by **CordedBowl** » Thu Oct 31, 2013 1:17 pm

No worries, good things take time!

MrGrey · Post by **MrGrey** » Thu Oct 31, 2013 5:40 pm

REDBEN · Post by **REDBEN** » Mon Nov 04, 2013 10:45 pm

I have started compiling the fitting kits tonight to fit the PRD Licence plate brackets, laser cutting is completed, should be at my workshop Tomorrow morning. I will send these all out on Wednesday morning (Unless your picking it up, in which you will have to PM me to organise a time to pick up)

MrGrey · Post by **MrGrey** » Mon Nov 04, 2013 11:20 pm

oh look! I'm resting my nuts on your desktop!... tss tss

Group buy for Garage Star licence plate bracket?

Who is online