belt tension esp. superchargers

Archives of Posts to the NZ MX5 List back in 2004
Locked
dscotland

belt tension esp. superchargers

Post by dscotland » Tue Dec 07, 2004 11:45 am

Hi all.

After some clarification on supercharger belts and the tightness of them.
I have been told two things, one that the belt should be as tight as
possible to avoid belt slippage etc, and two that the belt should not be
overtightened as it puts undue pressure on the front crank bearing? which
has a history of failing in early NA engines (apparently this was fixed in
later engines with a change to a larger crankshaft bearing???)

If anyone can clarify for me I would be very appreciative. I'm no
mechanic so not sure if the above parts are described correctly.

Duncan

From jifjif@gmail.com Fri Apr 27 18:35:36 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com;
h=received:message-id:date:from:reply-to:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:references;
b=AtZHJ1NbIMpiRMg3SE18VGX8ZX+hMPQ75oNxLieSN6l6anB/Mp4lzNdZAtVFJwjuFJK7CYzcK16/sBFs1dOR7BDx/2k+fIsJjp75UZ2z1DzzvjdAMUZCJ0vZ7G0MFfa+VvoJlp1lQB+ByeRFlAuw+c+88Q1mbGsG5PvI0icVy1g=
Date: Tue, 7 Dec 2004 12:03:49 +1300
From: ~Jeff~ <jifjif@gmail.com>
To: MX5List <mx5list@mx5club.org.nz>
Subject: Re: belt tension esp. superchargers
In-Reply-To: <OFAF067E34.C6DAE67A-ONCC256F62.007CA4FE-CC256F62.007D073D@repnet.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
References: <001901c4dbe2$e0bf9400$014665da@PC446628134234>
<OFAF067E34.C6DAE67A-ONCC256F62.007CA4FE-CC256F62.007D073D@repnet.com>
Precedence: list
Message-ID: <07Lm4D.A.3lG.DpZMGB@L733>

hi Duncan,

Have you had a sniff around the sscor site/mailing list... and biggulp.net?

Sounds about right, although I've no first hand experience.

On Tue, 7 Dec 2004 11:45:33 +1300, dscotland@repco.co.nz
<dscotland@repco.co.nz> wrote:
[...]

dscotland

belt tension esp. superchargers

Post by dscotland » Tue Dec 07, 2004 1:43 pm

thanks Jeff, useful sites. Can't wait to get 362hp at the wheels as per
the Big Gulp car, but right now I just want it to run better.

Duncan


~Jeff~ <jifjif@gmail.com>
Sent by: e-admin@mx5club.org.nz
07/12/2004 12:03 p.m.
Please respond to
MX5List<mx5list@mx5club.org.nz>


To
MX5List <mx5list@mx5club.org.nz>
cc

Subject
Re: belt tension esp. superchargers


hi Duncan,

Have you had a sniff around the sscor site/mailing list... and
biggulp.net?

Sounds about right, although I've no first hand experience.

On Tue, 7 Dec 2004 11:45:33 +1300, dscotland@repco.co.nz
<dscotland@repco.co.nz> wrote:
Hi all.

After some clarification on supercharger belts and the tightness of
them. I
[...]

Matt & Sarah Avery

belt tension esp. superchargers

Post by Matt & Sarah Avery » Thu Dec 09, 2004 10:53 pm

I've never actually adjusted the tension myself on my belts but I can
tell you that if you belt is slipping you will get very noticeable belt
dusting on the underside of your bonnet.

Lou Girardin

belt tension esp. superchargers

Post by Lou Girardin » Mon Dec 13, 2004 9:48 pm

Do NOT overtighten the belt, it will break. Adjust to approx 9mm flex in the
middle of the longest run. If you have excessive dusting, it's too loose.
Lou

Locked

Return to “2004”

Who is online

Users browsing this forum: No registered users and 10 guests