Door opening mechanism

Archives of Posts to the NZ MX5 List back in 2006
Locked
David Moughtin

Door opening mechanism

Post by David Moughtin » Thu Apr 27, 2006 10:39 pm

I have just tried to open my driver's door from the inside and something has
broken. It cannot be opened using the inside or outside door handles. If I
take the plastic moulding off from around the inside handle I can see that the
metal rod still moves with the handle so perhaps the problem is at the door
catch end.

Has anyone experienced something similar? If so, any solutions would be most
appreciated, particularly, how can I open the door to take the inner liner off
to fix whatever is broken?

Thanks


David Moughtin

From jifjif@gmail.com Fri Apr 27 17:56:46 2007
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com;
h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references;
b=Q83aJqk24Npt4Y7JF7VW/sraTlNCaWMjOmF/yHsXv8JLIlGGYp1lBNg6g5erzVBnaClKVIzG5jxpbBiGH42BB2PLWPuKRvubfFP+KuFVn4PTRHeLj9xA+74FupHVmyfPVWrlJPg3B2YNwbOw7M5Pk7CZyCLOZ0rql6PEEr9g4fo=
Date: Thu, 27 Apr 2006 23:07:35 +1200
From: ~Jeff~ <jifjif@gmail.com>
To: MX5List <mx5list@mx5club.org.nz>
Subject: Re: Door opening mechanism
In-Reply-To: <001001c669e6$d8b6efe0$0100000a@lan>
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
References: <001001c669e6$d8b6efe0$0100000a@lan>
Content-Transfer-Encoding: 7bit
Precedence: list
Message-ID: <wL6jxC.A.HQH.bGZMGB@L733>

maybe a slimjim (not the biscuit!) or something similar? There's a
little lever near the B pillar that needs to be pushed... or pulled...

On 27/04/06, David Moughtin <Cola@paradise.net.nz> wrote:
[...]

mx5mike
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 106
Joined: Sat May 06, 2006 12:06 am
Location: North Shore

Door opening mechanism

Post by mx5mike » Thu Apr 27, 2006 11:29 pm

Yup, I know that one :)

There is a small spring that will be now be sitting inside the door. It has
either broken or fallen off.

If you can work out where it goes, you'll be fine.

_____

From: e-admin@mx5club.org.nz [mailto:e-admin@mx5club.org.nz] On Behalf Of
David Moughtin
Sent: Thursday, 27 April 2006 10:39 p.m.
To: MX5List
Subject: Door opening mechanism


I have just tried to open my driver's door from the inside and something has
broken. It cannot be opened using the inside or outside door handles. If I
take the plastic moulding off from around the inside handle I can see that
the metal rod still moves with the handle so perhaps the problem is at the
door catch end.

Has anyone experienced something similar? If so, any solutions would be most
appreciated, particularly, how can I open the door to take the inner liner
off to fix whatever is broken?

Thanks


David Moughtin

Locked

Return to “2006”

Who is online

Users browsing this forum: No registered users and 13 guests