Rear end clunk

Discussions relating to MX5 Tyre choice, Wheels, Brakes Suspension components and other items to keep you going around corners, stuck to the ground or stopping on a dime.

Moderators: Growler, jif, Born_disturbed, punkoutnz

Post Reply
JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Rear end clunk

Post by JaredH » Fri Jun 26, 2015 5:41 pm

Hi Guys

I've been getting a clunking from the back end of my '89 when accelerating hard, it's kind of like the tyres are almost letting go and something is moving back and forward creating a clunk.
It's been happening quite a while, originally thought it was my struts moving but have changed them and still does it, have also changed diff and still does it, all I can think is it may be worn bushings?

Any thoughts or anyone had a similar problem?

Cheers

WideOpenThrottle
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1293
Joined: Wed Dec 24, 2008 11:35 am
Location: 36.8167° S, 174.4167° E

Post by WideOpenThrottle » Sat Jun 27, 2015 8:27 am

I had my exhaust hitting the diff output drive-shaft flange on hard cornering so could be something similar?
1989 NA 1650
1998 NB 1800
2005 NC 2000
1990 Landcruiser
Surfboard
Push-bike
Hiking shoes

WideOpenThrottle
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1293
Joined: Wed Dec 24, 2008 11:35 am
Location: 36.8167° S, 174.4167° E

Post by WideOpenThrottle » Sat Jun 27, 2015 8:35 am

Also check that your wheel alignment bolts are TIGHT as they could be moving a bit. Check all suspension bolts and bushings while your there too!
1989 NA 1650
1998 NB 1800
2005 NC 2000
1990 Landcruiser
Surfboard
Push-bike
Hiking shoes

marcellarius
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 367
Joined: Thu Apr 18, 2013 12:52 pm
Location: Hamiltron

Post by marcellarius » Sat Jun 27, 2015 9:36 am

A mate's subie had a weird clunk like that, which turned out to be the muffler hitting the towbar.

Keith Jones
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 329
Joined: Thu Jul 06, 2006 6:30 pm
Location: Waiuku

Post by Keith Jones » Sat Jun 27, 2015 2:13 pm

Driveshaft universals?

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Sat Jun 27, 2015 8:43 pm

I will check all when I get a chance this week, have just ordered poly bushes so hopefully will find the fix

Keith Jones
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 329
Joined: Thu Jul 06, 2006 6:30 pm
Location: Waiuku

Post by Keith Jones » Mon Aug 03, 2015 8:13 pm

Did you find the source of the clunk?

Snapfrozen
I am quitting my job and going 5-ing
I am quitting my job and going 5-ing
Posts: 747
Joined: Sun Jun 24, 2012 11:58 am

Post by Snapfrozen » Mon Aug 03, 2015 8:24 pm

My money is on torn exhaust hanger.

Angreal
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1621
Joined: Tue Feb 03, 2009 10:13 pm
Location: At the pub

Post by Angreal » Tue Aug 04, 2015 8:55 am

My car clunks due to the sway bar at the back

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Thu Aug 06, 2015 7:36 pm

Finally got round to checking today. Driveshaft didnt seem to have any excessive play. It could be the exhaust hitting diff flanges, but I'm not convinced. Didn't get a chance to check alignment bolts etc, but everything's coming out for new bushings over the next few weeks so will get a better look then.

Angreal
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1621
Joined: Tue Feb 03, 2009 10:13 pm
Location: At the pub

Post by Angreal » Fri Aug 07, 2015 3:24 pm

If you ever drive my car the clunks you'll hear are the FM (first gen) rear swaybar sliding left and right or the clutch diff which is noisy.

SLYDIT
Keep calm, Forum Moderator here.
Keep calm, Forum Moderator here.
Posts: 1610
Joined: Sun May 21, 2006 6:18 pm
Location: In the Garage.

Post by SLYDIT » Sat Aug 08, 2015 7:43 am

Check your left side engine mount. they are known to fail causing the engine to twist and bang on stuff like exhaust or cause ppf to twist/ clunk.
RED '90 TURBO.
SCARING PRIUS DRIVERS SINCE 2002

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Sat Aug 08, 2015 4:58 pm

I'll have a look next time i'm at the car. Although I only recently changed the engine mounts so hopefully they're not toast already.

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Wed Aug 12, 2015 7:50 am

Another thing, while I have the car jacked up and somewhat apart to do the poly bushings, is there anything anyone would recommend to replace/check (not related to the clunk just maintenance wise)?

JaredH
Tentative sideways sliding....
Tentative sideways sliding....
Posts: 37
Joined: Sat Apr 26, 2014 11:08 am

Post by JaredH » Sun Sep 13, 2015 6:13 pm

Finally got car back on the ground, i believe the noise was the exhaust banging around, i've put some stiffer hangers on which has got rid of most the banging

preeetsabbi
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 2
Joined: Mon May 16, 2016 4:23 pm

Post by preeetsabbi » Mon May 16, 2016 4:39 pm

my car clunks cus its got aftermarket break pads, which sits in the caliper and clunks when ever i go over a bump.

Keith Jones
I count 5-s in my sleep
I count 5-s in my sleep
Posts: 329
Joined: Thu Jul 06, 2006 6:30 pm
Location: Waiuku

Post by Keith Jones » Mon May 16, 2016 5:07 pm

Sounds like your pad W springs are missing.

Post Reply

Return to “MX5 Suspension, Wheels, Tyres & Brakes etc”

Who is online

Users browsing this forum: No registered users and 10 guests