Stud pattern

Discussions relating to MX5 Tyre choice, Wheels, Brakes Suspension components and other items to keep you going around corners, stuck to the ground or stopping on a dime.

Moderators: Growler, jif, Born_disturbed, punkoutnz

Post Reply
Donovan
I only think 5.
I only think 5.
Posts: 917
Joined: Tue Aug 10, 2010 10:05 pm
Location: Auckland

Stud pattern

Post by Donovan » Thu Mar 13, 2014 9:28 am

I am knocking around the idea of changing my wheel stud pattern from 4 stud to 5 stud, most likely 5x114 as that seems the most common in 5 stud for the sizes that I am looking at.

This will open a whole new range of possibilities of wheel options to me.

Anyone know what is involved, how hard it is, and how much it might cost?

WideOpenThrottle
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1293
Joined: Wed Dec 24, 2008 11:35 am
Location: 36.8167° S, 174.4167° E

Post by WideOpenThrottle » Thu Mar 13, 2014 12:50 pm

Try some reading


I want 5 studs!!! but How? [Archive] - MX-5 Miata Forum



forum.miata.net › ... › Tires & Wheels‎







Aug 13, 2006 - 16 posts - ‎15 authors
5 studs will give me more selection on wheels and etc. ... As long as the bolt circle you desire is not so large the hub can not accomadate it ...


Wheel Spacers [Archive] - MX-5 Miata Forum

24 posts

15 Jul 2010


5 lug conversion [Archive] - MX-5 Miata Forum

100+ posts

13 Dec 2007


Why does the Miata only have 4-bolt wheels ...

57 posts

10 Oct 2002


Hub-centric rims? [Archive] - MX-5 Miata Forum

16 posts

1 Nov 2000


More results from forum.miata.net



5 lug miata - Miata Turbo Forum - Turbo Kitten is watching you ...



www.miataturbo.net › ... › Suspension, Brakes, Drivetrain‎







Oct 8, 2008 - 20 posts - ‎5 authors
Don't say it's because there are more 5 lug wheels on the market, .... and your rear hubs are 5 lug, and you want to make your fronts 5 lug too.


Replacing rear wheel studs, is it tough?

20 posts

21 Aug 2010


Konig Feathers look bit to narrow - spacers, hubs, studs ...

17 posts

19 Jul 2010


4x114.3 / 5x114.3 HUBs

13 posts

11 Jun 2010


Where to buy extra long wheel studs?

12 posts

8 Feb 2010


More results from www.miataturbo.net



5 Lug miata? - ClubRoadster.net



clubroadster.net/vb_forum/32-brakes.../43552-5-lug-miata.html‎







Mar 18, 2011 - 30 posts - ‎16 authors
So does anyone make 5 lug hubs or swaps for NA miata's? I know they make aftermarket 5 lug hubs for 240sx just seeing if anyone has heard ...


LocostUSA.com • View topic - Possible Miata 5 Lug Conversion ...



http://www.locostusa.com/forums/viewtop ... 9413‎







Jun 24, 2010 - 10 posts - ‎6 authors
After searching for months for a possible way to convert the miata hubs to 5 lug, i think i have a way to do it, relatively easily: 1. For rear hubs ...


All 4 hubs for a miata 5 lug ...

3 posts

13 Jul 2011


miata spindles... hub to convert to ...

8 posts

12 Jan 2009


More results from www.locostusa.com
1989 NA 1650
1998 NB 1800
2005 NC 2000
1990 Landcruiser
Surfboard
Push-bike
Hiking shoes

Angreal
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1621
Joined: Tue Feb 03, 2009 10:13 pm
Location: At the pub

Post by Angreal » Thu Mar 13, 2014 2:37 pm

Didn't bother reading the response above as there was a lot of information. Sorry if this is a repeat...

I do know that the rx7 things (very technical i know) can be used as the v6 miata on miata.net that featured a while back had them. As to how, not sure but it might be an avenue to look into

http://www.miata.net/news/v6.html this one

2low2c
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 153
Joined: Thu Feb 28, 2008 8:35 pm
Location: north shore

Post by 2low2c » Thu Mar 13, 2014 3:37 pm

donovan with your custom rear hubs and brakes you have already the cost of the conversion would out way the gain, you could have 3 piece wheels mad for about the same money

sprsta
I have stars, you haven't. Deal with it
I have stars, you haven't.  Deal with it
Posts: 1024
Joined: Mon Aug 25, 2008 6:11 pm
Location: auckland

Post by sprsta » Thu Mar 13, 2014 4:54 pm


Donovan
I only think 5.
I only think 5.
Posts: 917
Joined: Tue Aug 10, 2010 10:05 pm
Location: Auckland

Post by Donovan » Thu Mar 13, 2014 7:12 pm

2low2c wrote:donovan with your custom rear hubs and brakes you have already the cost of the conversion would out way the gain, you could have 3 piece wheels mad for about the same money
More than $4K-$5K cause that's how much a mad set of 3 piece wheels is going to cost me.

2low2c
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 153
Joined: Thu Feb 28, 2008 8:35 pm
Location: north shore

Post by 2low2c » Thu Mar 13, 2014 9:02 pm

not to sure on price , but with what they charged you for the rear hubs and axeles last time. having said that without pulling one side of the rear apart to see exactly how they did it could workout fesible, the fronts aren't that hard its just the rear

Donovan
I only think 5.
I only think 5.
Posts: 917
Joined: Tue Aug 10, 2010 10:05 pm
Location: Auckland

Post by Donovan » Fri Mar 14, 2014 6:24 pm

2low2c wrote:not to sure on price , but with what they charged you for the rear hubs and axeles last time. having said that without pulling one side of the rear apart to see exactly how they did it could workout fesible, the fronts aren't that hard its just the rear
Anytime you want to pull it apart, just yell.

Donovan
I only think 5.
I only think 5.
Posts: 917
Joined: Tue Aug 10, 2010 10:05 pm
Location: Auckland

Post by Donovan » Fri Mar 14, 2014 6:26 pm

But on the line of stupid thoughts, another one from the uneducated, is it possible to drill extra holes in a 5x114 wheel to make it a multifit, or only really can do that with a 4x114?

2low2c
Need, more, 5-ing, time....
Need, more, 5-ing, time....
Posts: 153
Joined: Thu Feb 28, 2008 8:35 pm
Location: north shore

Post by 2low2c » Fri Mar 14, 2014 6:37 pm

simple answer NO there is not enough surface area .

DEATH_INC.
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 13
Joined: Fri Apr 18, 2014 12:15 pm
Location: Jaffaland

Post by DEATH_INC. » Fri Apr 18, 2014 12:32 pm

There's a few wheels that can be custom drilled out there...check out the Koya range....

DEATH_INC.
Hey. They are NOT Training wheels.
Hey.  They are NOT Training wheels.
Posts: 13
Joined: Fri Apr 18, 2014 12:15 pm
Location: Jaffaland

Post by DEATH_INC. » Fri Apr 18, 2014 12:33 pm

Donovan wrote:But on the line of stupid thoughts, another one from the uneducated, is it possible to drill extra holes in a 5x114 wheel to make it a multifit, or only really can do that with a 4x114?
If the wheel has no recesses on the rear then you can '9 hole' it, but only to the same pcd

Post Reply

Return to “MX5 Suspension, Wheels, Tyres & Brakes etc”

Who is online

Users browsing this forum: No registered users and 18 guests