Dunno, haven't had a change to fiddle around with it too much as yet. I did adjust the front ones before this post to them being maxed out, the rattle has stopped for the moment, but now it leaks on the passenger side when it rains. Hopefully get some time this weekend to pull it off and fiddle arou...

Yeah, guess I could play around with the rear tabs, hope I can get the screws up, they are a little bit rusted over, as it has been a while since I changed anything back there.

Yeah, the tabs are there, but the rattle is from the front of the hardtop, not the rear.

So what do you do when you can no longer adjust the hardtop latches because they are maxed out, but your hardtop still rattles around?

Is the fuel pump working? I had the same thing, would crank over, turned out to be a relay to the fuel pump had fried itself.

works on mine, but not exactly Jap anymore

Keith Jones wrote:I'm not sure whether there is a limit, but the latest race car has been on hold for more than 5 years, so you should be good for a while yet.

My KP62 starlet has been on hold for over 10years now, so no, there isn't any limit

MrGrey wrote:Danovans V8 is awesome... I am sure he will be able to give you all the information you need

And is even more awesome now since the last time that I took you for a spin as it is a lot louder, and goes even more sideways.

Before anyone else replies, saying me, I will.

Me.

Have sent you a message

Angreal wrote:Nooooo don't do the fastback. I just received confirmation that mine is ready and being boxed up at the moment

Thought you were getting rid of your car and associated bits and pieces?

Congrats on the moving up, expect to see the fastback soon, so then I can look at it and make a call whether I get one as well.

BRM wrote:Brought a LS engine.
Picking it up tonight.

If you want to know anything about the conversion, or have a look at one already done, you know how to get hold of me.

From the look of it, someone didn't pay the domain renewal in time, so it was suspended, and was pending release to the general public, but I guess somone has done the renewal now.

Is the shaking with the softop up, or happens whether it is up or down. When I first got my NA, if I took the roof off it, it would shake something cronic, put the hardtop on, and it was as good as gold. I just ended up leaving the hardtop in place, as I bought the car for it's handling, rather than...

Sorry REDBEN, it's next year and still haven't painted her, but did buy new suspension, Xida Supermiata's, spring rate 14kg front, 9kg rear. I guess technically I bought these last year, as order and paid for them in September, but they only turned up in the last couple of weeks. Now just have to pu...

If you want to do something cheap, I have a 1.6 VLSD lying around, dunno what it is like as never had it in a car, but you can have it for $80.

Well, whenever you are up in AKL, your welcome to come and have a look at my rear end, of the car that is, just in case anyone was thinking the of the hairdresser connotation, and see whether the setup it any easier or not.

found it, had a look, looks like a 1.6 VLSD.

anybody want to buy a 1.6 VLSD then?

Yeah, it's a MX5 unit, will see if I can find that.

Yes I can, and can grab both axle and moved them in opposite directions, so guessing that means it is a LSD, not welded.

So, bought a car on a whim, and it turns out it had a spare diff in the boot.

you turn one axle and the other turns in the same direction, is that a LSD or non LSD?

Holden CV by donovan.brook, on Flickr

Picture of the new CV boot, sorry, no time to clean under there before the pic, but you get the idea. Have done about 20,000km on that setup and no issues so far

Just in regards to the diff, I ended up finding a solution for not having to touch the A-arms, or move the position of the shocks or anything like that. Originally the shocks were touch and rubbing against the CV joints and destroyed them in about 200km, and that was after the muppets that put the r...

Poo's, was hoping it was going to tell me why the enter button wasn't working.

Oh well, time to start replacing parts I guess.

Thanks for all your help/translations/renglish

here you go, it's the one in yellow, not the ETC one.

Error message, what is it by donovan.brook, on Flickr