Search found 13 matches

by DEATH_INC.
Sun Sep 27, 2015 2:03 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Right...think I've found the problem, or at least it found itself... I had something similar to yours a while back and it turned out to be the battery. I would also check the alternator as well even if they both turn out fine at least it eliminates them both from adding to the problem. This guy^ got...
by DEATH_INC.
Sat Aug 22, 2015 10:54 am
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Cool, will give that a shot...but i think it does it cold too...can't remember if I've tried it cold tho. Thanks.
by DEATH_INC.
Sat Aug 15, 2015 12:01 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Yeh...I am too, i can't for the life of me think what needs a 'rest' after you turn off the key...I will post up what I find...if I do.
by DEATH_INC.
Thu Aug 13, 2015 6:18 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

I'll check that cranking voltage...but it doesn't explain why it starts no probs after stalling....dwell should be ok as msnz set it up, and it's been running on another car too. Thanks Jared (and for checking the MS out for me too) I'm a little way off giving up yet...and I do need that tune....I'l...
by DEATH_INC.
Tue Aug 11, 2015 5:53 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Fuel pump runs fine ( Walbro, you can hear it pushing fuel through the reg, and actually hear it running) Injectors are new (from megasquirt), and fuel must be getting to the rail as you can hear it going through the reg. If it was the master relay, would it cut power to the injectors? Or coil pack?...
by DEATH_INC.
Sun Aug 09, 2015 3:10 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Thanks, but not the battery/ alternator. It won't start even with a jump when it won't start, and the alternator is putting out plenty of charge.
It cranks over fine, just won't fire.
by DEATH_INC.
Sat Aug 08, 2015 1:34 pm
Forum: MX5 Electrical, Audio, Alarms & Electronics
Topic: Won't start after turning key off
Replies: 17
Views: 22142

Won't start after turning key off

It's a 1600 NA with turbo and megasquirt. A little history....I did the turbo and megasquirt conversion about 6 months ago, it ran fine for a while (maybe 1/2 doz decent drives) then was left sitting for a month or 2. Then it wouldn't start, so I started looking for the problem which I never really ...
by DEATH_INC.
Sun May 04, 2014 10:31 am
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: TEIN springs
Replies: 23
Views: 49205

If they're teins on billies, they should be standard 65mm id competition springs.(pretty sure most tein coilover one's are.) If that's the case, then obviously you could use any comp spring (not just tein) so just get dobi or kings one's, any length from 180mm to 400mm from memory, and from 150lbs t...
by DEATH_INC.
Fri Apr 18, 2014 12:51 pm
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: OEM Bilstein dampers in JDM 1998 NB RS - what springs?
Replies: 30
Views: 56462

Digressive damping (hard on slow bumps, soft on fast) is good for track use, not so good on the road. It lets the tyres stay in contact with the ground, while providing control, but it does give a firm ride on our cool roads.... Don't go blindly lowering it as much as you can without looking at what...
by DEATH_INC.
Fri Apr 18, 2014 12:38 pm
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: Hub-centric spacers
Replies: 9
Views: 14196

sprsta wrote:I had a set made by Znoelli for Hayleys car.
Leons (Znoelli) spacers are top quality, and are the only one's I recommend to customers who want good stuff (not cheap...few and far between these days lol) or need them for high performance use.
by DEATH_INC.
Fri Apr 18, 2014 12:33 pm
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: Stud pattern
Replies: 11
Views: 19220

Donovan wrote:But on the line of stupid thoughts, another one from the uneducated, is it possible to drill extra holes in a 5x114 wheel to make it a multifit, or only really can do that with a 4x114?
If the wheel has no recesses on the rear then you can '9 hole' it, but only to the same pcd
by DEATH_INC.
Fri Apr 18, 2014 12:32 pm
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: Stud pattern
Replies: 11
Views: 19220

There's a few wheels that can be custom drilled out there...check out the Koya range....
by DEATH_INC.
Fri Apr 18, 2014 12:28 pm
Forum: MX5 Suspension, Wheels, Tyres & Brakes etc
Topic: Noob wheel paint query: All done
Replies: 64
Views: 86919

We do this stuff at work....I recommend prepsoling, then wetsanding (dishwashing liquid in the water) with 600, prime with a high solid primer, wetsand with 600 again, then coat with your colour/clearcoat. Wheels get covered in silicon when it gets used on your tyres, this crap will make 'em wax lik...

Go to advanced search